3545 cadillac avenue ? costa mesa, ca 92626-1401 ? (714) 433-1200 ? fax (714) 433-1234 marketing bulletin date: april 20 th , 2010 to: all sales personnel from: isaac gonzalez re: product termination to all concerned parties, this bulletin is to notify all customers of the discontinuation of the following ecliptek series effective april 20 th , 2010: series description recommended replacement ec11 rohs compliant (pb-free) 5.0v 14 pin dip metal thru-hole hcmos/ttl oscillator eh11 ec11hs rohs compliant (pb-free) 5.0v 8 pin dip metal thru-hole hcmos/ttl oscillator eh11hs in compliance with our end of life (eol) policy, this will serve as advanced notice of product termination. new orders will not be accepted after september 1 st , 2010, with delivery to conclude by december 1 st , 2010. if there are any questions pertaining to this bulletin, please feel free to contact me. thank you again for your cooperation. best regards, isaac gonzalez configuration manager ecliptek corporation
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec11 14 pin dip 5.0v os04 08/06 oscillator ec11 ec11 series ? crystal clock oscillators ? cmos/ttl output ? +5.0v supply voltage ? tri-state output option ? custom lead length & gull wing options ? 14 pin dip metal package ? rohs compliant (pb-free) electrical specifications frequency range (mhz) operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability tri-state input voltage aging (at 25c) start up time period jitter: absolute period jitter: one sigma 0.250mhz to 106.250mhz 0c to 70c or -40c to 85c -55c to 125c 5.0v dc 10% 45ma maximum 55ma maximum 65ma maximum 85ma maximum 100ppm, 50ppm, 25ppm, or 20ppm max. (0c to 70c only) 2.4v dc minimum v dd -0.5v dc minimum 0.4v dc maximum 0.5v dc maximum 6 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 50 5(%) (optional) 10ttl load or 50pf cmos load 10ttl load or 15pf cmos load 10lsttl load or 15pf hcmos load enables output enables output disables output: high impedance 5ppm / year maximum 10mseconds maximum 100pseconds maximum 25pseconds maximum 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 5.08 w 20.8 l 13.2 250.000khz to 24.000mhz 24.001mhz to 50.000mhz 50.001mhz to 66.667mhz 66.668mhz to 106.250mhz inclusive of operating temperature range, supply voltage, and load w/ttl load w/cmos load w/ttl load w/cmos load 0.4v dc to 2.4v dc w/ttl load; 20% to 80% of waveform w/cmos load at 1.4v dc w/ttl load; at 50% of waveform w/cmos load at 1.4v dc w/ttl load or w/cmos load < 70.000mhz at 50% of waveform w/ttl load or w/cmos load > 70.000mhz 250.000khz to 24.000mhz 24.001mhz to 70.000mhz 70.001mhz to 106.250mhz v ih :no connection v ih : 2.2v dc v il : 0.8v dc
ecliptek corp. oscillator ec11 14 pin dip 5.0v os04 08/06 manufacturer category series package voltage class rev . date ec11 00 et t ts - 60.000m - g frequency tolerance / stability 00=100ppm max., 45=50ppm max. 25=25ppm max., 20=20ppm max. operating temp. range blank=0c to 70c , et=-40c to 85c duty cycle blank=50 10(%) , t=50 5(%) available options blank=none clxxx=custom lead length g=full size gull wing frequency k=khz, m=mhz output control function blank=none (no connection on pin 1) ts=tri-state enable high part numbering guide line 1: ecliptek line 2: ec11 ts output control function blank = none (no connection on pin 1) ts = tri-state enable high series designator line 3: xx.xxx m m=mhz, k=khz frequency (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ ________________________________________________________________________ _______________________________________________________ ________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ ________________________________________________________ _______________________________________________________________________ _______________________________________________________________________________________________________________________________ __________________________ pin 1: no connect or tri-state pin 7: case ground pin 8: output pin 14: supply voltage mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 characteristic specification solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec11 8 pin dip 5.0v os05 08/06 ec11 series ? crystal clock oscillators ? cmos/ttl output ? +5.0v supply voltage ? tri-state output option ? custom lead length & gull wing options ? 8 pin dip metal package ? rohs compliant (pb-free) electrical specifications ec11 oscillator 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. frequency range (mhz) operating temperature range storage temperature range supply voltage (v dd ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability tri-state input voltage aging (at 25c) start up time period jitter: absolute period jitter: one sigma 0.250mhz to 106.250mhz 0c to 70c or -40c to 85c -55c to 125c 5.0v dc 10% 45ma maximum 55ma maximum 65ma maximum 85ma maximum 100ppm, 50ppm, 25ppm, or 20ppm max. (0c to 70c only) 2.4v dc minimum v dd -0.5v dc minimum 0.4v dc maximum 0.5v dc maximum 6 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 50 5(%) (optional) 10ttl load or 50pf cmos load 10ttl load or 15pf cmos load 10lsttl load or 15pf cmos load enables output enables output disables output: high impedance 5ppm / year maximum 10mseconds maximum 100pseconds maximum 25pseconds maximum 250.000khz to 24.000mhz 24.001mhz to 50.000mhz 50.001mhz to 66.667mhz 66.668mhz to 106.250mhz inclusive of operating temperature range, supply voltage, and load w/ttl load w/cmos load w/ttl load w/cmos load 0.4v dc to 2.4v dc w/ttl load; 20% to 80% of waveform w/cmos load at 1.4v dc w/ttl load; at 50% of waveform w/cmos load at 1.4v dc w/ttl load or w/cmos load < 70.000mhz at 50% of waveform w/ttl load or w/cmos load > 70.000mhz 250.000khz to 24.000mhz 24.001mhz to 70.000mhz 70.001mhz to 106.250mhz v ih :no connection v ih : 2.2v dc v il : 0.8v dc h 5.6 l 13.2 w 13.2
line 1: ecliptek line 2: ec11 ts output control function blank = none (no connection on pin 1) ts = tri-state enable high series designator line 3: xx.xxx m m=mhz, k=khz frequency (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot ecliptek corp. oscillator ec11 8 pin dip 5.0v os05 08/06 manufacturer category series package voltage class rev . date ec11 00 hs et t ts - 60.000m - g tr frequency tolerance / stability 00=100ppm max., 45=50ppm max. 25=25ppm max., 20=20ppm max. package hs=half size 8 pin dip operating temp. range blank=0c to 70c , et=-40c to 85c duty cycle blank=50 10(%) , t=50 5(%) output control function blank=none (no connection on pin 1), ts=tri-state enable high packaging options blank=bulk tr=tape & reel (only offered with half size g and half size g2 options) available options blank=none clxxx=custom lead length g=half size gull wing g2=half size gull wing frequency k=khz, m=mhz part numbering guide 700 pieces per reel compliant to eia-481a ? pin 1: no connect or tri-state pin 4: case ground pin 5: output pin 8: supply voltage mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters pin 1 locator for gull wing (1) for ?g? option (2) for ?g2? option marking specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. environmental/mechanical specifications characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215
|
